Vornado 633 Spécifications télécharger pdf (Page 12)

12 English

Blade Removal

It is possible to remove the blade should something

accidentally get wrapped around the motor shaft.

First, remove the nut from the shaft (only necessary on

V102, 133, 270, 573, 533, 633, 673, 679, 743 and 753

models.) Turn the nut clockwise to loosen. Pull the

blade straight out from the shaft. When replacing, the

blade can only go on the shaft one way. Be certain

the ﬂat side of the shaft aligns directly with the cor-

responding ﬂat side on the blade’s socket. Push the

blade all the way on the shaft until it bottoms out. Do

not use a hammer as this could result in bearing dam-

age. Reinstall nut on applicable models.

To clean motor cap and inlet ribs: Use a com-

mon household vacuum. Do not use water to

clean these parts of the Air Circulator.

To clean grill: Remove grill (See GRILL RE-

MOVAL instructions) and dust or wash with a

mild dishwashing soap. Do not place grill in the

dishwasher. The excessive heat can distort the

plastic.

To clean blade: Wipe with a damp cloth. If your

Air Circulator is used in a greasy environment,

such as a kitchen, mild soap or a common

household cleaner may be necessary. Do not

use solvents.

To clean base: Wipe with a damp cloth.

Because your Air Circulator moves a substantial amount of air, it will need

regular cleaning. To avoid risk of ﬁre, electrical shock, or injury to persons,

unplug the unit before any cleaning activity.

The motor is permanently lubricated and requires no oiling.

Cleaning and Maintenance

Remove the Nut

1 2 ... 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Vornado 633 Spécifications Page 12